UCPrimer
  • Tech Blog
  • About UCPrimer.com

SBA deployment and testing with Lync 2013 Part II

12/11/2013

2 Comments

 
Picture
In Part 1 of this article we walked through the steps to deploy a Lync 2013 SBA in a simulated branch office environment. Here in Part II, we will perform some tests of the SBA to verify the correct functional behavior using Microsoft-certified IP deskphones such as the Polycom CX600 LPE and the Polycom VVX310/410 Business Media phones. We also collect some performance results of the failover and failback times in this lab. The diagram for this lab environment consists of a Lync 2013 SE FE server in the "Main Site" and an Audiocodes M800 SBA in the "Branch Site". In the main site we have a Lync 2013 PC Client and a Polycom VVX410 phone and both accounts used to login are homed on the Lync SE FE server. At the branch site we have a Polycom CX600 phone and a Polycom VVX310 phone and both account used to login are homed on the SBA. Below is the diagram of this setup:

Picture
The following tests will be performed in the sequence below:
Test #1: WAN Link Up: 
    1a. Login to all phones using PIN Auth
    1b. Login to all phones using NTLM Auth
    1c. P2P voice calls between Main site and Branch Site
    1d. Multiparty voice calls between Main site and Branch Site

Test #2: WAN Link Down
     2a. Phone registration status after WAN Link is down and failover time
     2b. Initiate P2P calls within Branch site
     2c. Phone registration status after WAN Link is restored and failback time


Test #3: WAN Link Down during active calls
     3a. Initiate P2P voice call within Branch site, then WAN Link fails
     3b. Initiate multiparty voice call between Main site and Branch site, then WAN Link fails


Read More
2 Comments
    Picture
    Picture

    Important Links

    Microsoft Teams Docs
    Microsoft Learn

    ​Microsoft MVP Blogs

    Michael Tressler’s Blog
    Michael’s MTR Quick Tip Videos
    Jimmy Vaughan’s Blog
    Jeff Schertz
    Adam Jacobs
    James Cussen
    ​Damien Margaritis

    Archives

    September 2022
    August 2022
    March 2022
    February 2022
    January 2022
    December 2021
    November 2021
    October 2021
    September 2021
    August 2021
    June 2021
    April 2021
    March 2021
    December 2020
    October 2020
    September 2020
    August 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    September 2019
    August 2019
    July 2019
    March 2019
    November 2018
    October 2018
    September 2018
    August 2018
    June 2018
    March 2018
    February 2018
    January 2018
    December 2017
    November 2017
    August 2017
    July 2017
    April 2017
    March 2017
    February 2017
    January 2017
    November 2016
    October 2016
    September 2016
    August 2016
    July 2016
    June 2016
    May 2016
    April 2016
    March 2016
    January 2016
    November 2015
    October 2015
    September 2015
    August 2015
    July 2015
    June 2015
    May 2015
    April 2015
    March 2015
    February 2015
    January 2015
    December 2014
    November 2014
    October 2014
    September 2014
    August 2014
    July 2014
    June 2014
    May 2014
    April 2014
    March 2014
    February 2014
    January 2014
    December 2013
    November 2013
    October 2013
    September 2013
    August 2013
    July 2013
    June 2013
    May 2013
    April 2013
    March 2013
    February 2013
    January 2013
    December 2012
    November 2012
    September 2012
    August 2012

    Categories

    All
    Edge
    Exchange 2013
    Hybrid
    Lpe
    Lync 2010
    Lync 2013
    Mobility
    Oauth
    Office365
    Polycom
    Ucs

    RSS Feed

    This website uses marketing and tracking technologies. Opting out of this will opt you out of all cookies, except for those needed to run the website. Note that some products may not work as well without tracking cookies.

    Opt Out of Cookies